+91 90490 08649

Contact us 24 hours a day, 7 days a week
ХАDО® REVITALIZANT EX120  for cylinders (blister package, tube 9 ml)
  • SKU: ХА 10338_1

ХАDО® REVITALIZANT EX120 for cylinders (blister package, tube 9 ml)

₹1,500.00
Shipping calculated at checkout.

REVITALIZANT® EX120 for Cylinders.

Enhanced REVITALIZANT® designed for restoration, repair, and antiwear protection of the cylinder-piston group of the engine without its disassembly. Forms a ceramic-metal coating on the surfaces of parts of the cylinder-piston group. As a result, the geometry of cylinders is restored, their inner diameter decreases, and ovality disappears.

  • Increases compression
  • Eliminates scuffs and scratches of up to 0.1 mm in depth
  • Protects cylinders from wear by cold start
  • Reduces noise and vibration
  • Increases engine power
  • Reduces fuel consumption
  • Reduces the content of CO and HC in exhaust gases
  • Enables selective repair (treatment of one or several cylinders)

Detailed specifications

Application

Treatment of cylinders of the gasoline engine:

  • Warm up the engine (it should be warm, but not hot).
  • Unscrew the spark plug from the cylinder; disconnect the central cable of the ignition-timing sensor and the switch.
  • Introduce* the contents of one tube into the cylinder.
  • Ensure 15–20 piston strokes (by rotating the elevated traction wheel, towing, etc.).
  • Screw in the plug and run the starter 3–4 times for 3–4 seconds with break intervals of 15–20 seconds.
  • Connect the central cable and switch. Start the engine and idle it for 15 minutes.
  • Afterwards, operate your car in regular mode.

* Introduce the gel so that it gets onto cylinder walls, but not onto the piston. For that purpose, you can use a medical syringe with an extension tube, having previously dissolved the contents of the tube in 5–10 ml of motor oil. To avoid hydraulic shock, the total volume of the fluid should not exceed 20 ml.

Notes

Treatment of cylinders of the diesel engine is similar to that of the gasoline engine and is conducted by introducing the product through the opening of a nozzle or glow plug.

1 tube per 1 cylinder.

If the cylinder diameter exceeds 120 mm, the dosage should be doubled.

9 ml tube in a blister package, Art. ХА 10338_1

BACK TO TOP